Discbine Side-Pull Disc Mower-Conditioners
Hay Equipment
Model 210
Manufacturer New Holland
Discbine Side-Pull Disc Mower-Conditioners 210
Description
The Discbine® 209 and Discbine® 210 disc mower-conditioners help you make the very highest-quality hay, and help you keep more of it. They cut crop closely, cleanly and quickly, and condition it uniformly for faster drydown, preserving nutrients.
Features
CUTTING WIDTH (FT. IN. (M)): 10’ 4” (3.16)
NUMBER OF DISCS: 8
Specifications:
|
Discbine® 209
|
Discbine® 210
|
|
|---|---|---|
| Cutterbar | ||
|
Cutting width (ft. in. (m))
|
9’ 2” (2.8)
|
10’ 4” (3.16)
|
|
Cutterbar model
|
MowMax™ Modular Cutterbar with ShockPRO™ hubs
|
MowMax™ Modular Cutterbar with ShockPRO™ hubs
|
|
Number of discs
|
7
|
8
|
|
Knives per disc
|
2
|
2
|
|
Disc speed @ 540 rpm PTO speed (rpm)
|
3000
|
3000
|
|
Tilt angle (degrees)
|
2° - 10°
|
2° - 10°
|
|
Flotation
|
Up & back, adjustable springs
|
Up & back, adjustable springs
|
|
Drive method
|
PTO drive with slip & overrunning clutch to bevel gearbox to LH end of header, vertical PTO shaft to cutterbar
|
PTO drive with slip & overrunning clutch to bevel gearbox to LH end of header, vertical PTO shaft to cutterbar
|
|
Cutting height (in. (mm))
|
1.1-2.7 (29-68)
|
Flail Tine: 1.1-2.7 (29-68) or Roll: .95-2.4 (24-60)
|
|
Cutting height w/optional high-stubble shoes (in. (mm))
|
2.25-4.5 (58-115)
|
2.25-4.5 (58-115)
|
|
Cutting height w/optional adjustable shoes (in. (mm))
|
2.25-4.5 (58-115)
|
2.25-4.5 (58-115)
|
| Roll Conditioners | ||
|
Type
|
Chevron intermeshing rubber
|
Chevron intermeshing rubber or steel rolls
|
|
Length / Diameter (in. (mm))
|
90 (2286) / 10.4 (264)
|
102 (2591) / 10.4 (264)
|
|
Drive method
|
4 HB V-belt and enclosed gears
|
4 HB V-belt and enclosed gears
|
|
Speed (rpm)
|
647
|
647
|
|
Conditioner roll tension adjustment
|
Single crank
|
Single crank
|
|
Conditioner gap adjustment
|
Adjustable drawbolt stop, each end
|
Adjustable drawbolt stop, each end
|
| LeaningEdge™ Flail Conditioners | ||
|
Type
|
Flail rotor with 90 tapered flails
|
Flail rotor with 100 tapered flails
|
|
Length / Diameter (in. (mm))
|
90 (2286) / 22 (560)
|
102 (2591) / 22 (560)
|
|
Drive method
|
4 HB v-belt
|
4 HB v-belt
|
|
Speed (rpm)
|
718 standard, 1000 optional
|
718 standard, 1000 optional
|
|
Conditioner gap adjustment
|
Single crank adjustable rotor hood
|
Single crank adjustable rotor hood
|
| Crop Discharge | ||
|
Swath width (ft. (m))
|
6 (1.83)
|
7 (2.13)
|
|
Windrow width (ft. (m))
|
3-6 (0.9-1.83)
|
3-7 (0.9-2.13)
|
| Driveline | ||
|
Input speed (rpm)
|
540
|
540 or 1000 Standard Drawbar Attachment, 540 Only Swivel Hitch Attachment
|
|
Driveline protection
|
Slip clutch and overrunning clutch assembly at rear of PTO shaft
|
Slip clutch and overrunning clutch assembly at rear of PTO shaft
|
|
Secondary driveline
|
Non-CV driveline
|
Double CV Driveline - Head repositionable under load
|
| Tongue Options | ||
|
Type
|
Side-pull, straight tongue
|
Side-pull, curved tongue
|
|
Hitch type
|
Drawbar with CV PTO
|
Standard Drawbar with CV PTO, Swivel hitch with drawbar adapter or 2-point hitch
|
| Tractor Requirements | ||
|
Minimum PTO power required (hp (kW))
|
65 (49)
|
80 (60)
|
|
Hydraulic circuits required
|
2
|
2
|
|
Minimum relief pressure required (psi (bar))
|
1500 (103)
|
1500 (103)
|
|
Drawbar
|
ASAE Category II
|
ASAE Category II
|
|
Swivel Hitch - Drawbar
|
—
|
ASAE Category II or III
|
|
Swivel Hitch - 2-Point
|
—
|
ASAE Category II, III-N, or III
|
|
Electrical
|
7-pin electrical connector for transport lights
|
7-pin electrical connector for transport lights
|
| Tires | ||
|
Tubeless ag rib implement tires
|
9.5L x 14L 6PR
|
Standard hitch and flail conditioner: 9.5L x 14 6PR/ Swivel hitch and roll conditioner: 11L x 15 6PR
|
| Transport Speed | ||
|
Max road speed (mph (kph))
|
20 (32)
|
20 (32)
|
| Dimensions* | ||
|
Width, transport (ft. in. (m))
|
9’ 11” (3.02)
|
11’ 3” (3.42)
|
|
Width , operating (ft. in. (m))
|
14’ 10” (4.52)
|
16’ 0” (4.87) / 17’ 7’’ (5.36), with swivel hitch equipped
|
|
Length, transport (ft. in. (m))
|
Flail Tine: 18’ 1’’ (5.50)*** or Roll: 17’ 7’’ (5.23)***
|
Flail Tine: 18’ 1’’ (5.50)*** or Roll: 17’ 7’’ (5.23)***
|
|
Length, operating (ft. in. (m))
|
Flail Tine: 17’ 8’’ (5.4)*** or Roll: 17’ 2’’ (5.23)***
|
Flail Tine: 17’ 8’’ (5.4)*** or Roll: 15’ 7’’ (4.75)***
|
|
Height (ft. in. (m))
|
Transport: 5’ 8” (1.73) / Operating: 4’ 5” (1.35)
|
Transport: 5’ 3” (1.60) / Operating: 4’ 5” (1.35)
|
|
Ground clearance with head fully raised (in. (mm))
|
17 (4.32)
|
Flail Tine: 17 (4.32) or Roll: 18 (4.57)
|
| Weights** | ||
|
Operating weight (lbs. (kg))
|
Flail Tine: 3690 (1674)*** / Roll: 3740 (1697)***
|
Flail Tine: 4100 (1864)*** / Roll: 4160 (1891)***
|
*Manufacturer specifications, subject to change without notice.